Map, Compass & GPS

Map, Compass & GPS
Wild flowers along Fall Creek on the way to the Green Lakes - Oregon

Monday, September 24, 2018

GPS Tune-up for your fall hunt.

Hunters, this is a great time to tune-up and practice with a GPS receiver.  There are several things that one can do before leaving home.   Here are a few recommendations to consider.

Setup

  • Dump those old AA batteries, put in new ones.  If you leave your GPS on all day in the
    Garmin Image
       field expect to change the batteries nightly.  Consider using lithium AA’s, they last longer and work better in cold temperatures. 

  • “Match the map” with the receiver’s navigation selection options. Specifically, match the coordinate system (e.g., UTM or Latitude/Longitude) and map datum that are found on the map.  Consider shifting the receiver’s compass to degrees true.  Further, let’s have everyone in a hiking or hunting group use the same settings too; let’s all be on the same page.

  •  Keep you navigation simple.  It’s easier to work with a handful of waypoints rather than list of 300.  Dump the Junk - Delete the old waypoints, the ones you will never use again.  Log important waypoints (e.g., that lake side camp site) on your PC or in a notebook.  Visit www.easygps.com or www.garmin.com for a place to store waypoints.

  • Install maps on your GPS receiver.  Maps on the receiver are a natural complement to your paper field map.   Quality maps are available from onxmaps.com and GPSFiledepot.com (free).

  • Adjust your map pages’ zoom setting to see what works best.  For general trail hiking I  keep my zoom setting at 800 feet.  This setting allows me to view trails, water sources, roads and elevation contours.

  • Visit the manufacture’s web site to see if there are any firmware updates.  I do this every couple of months.

  • When batteries are replaced calibrate the electronic compass.

Tune-up

  • Verify that you are receiving enough satellite signals.  Check this on the satellite status screen.  Four satellites are the minimum.  Give older receivers the time to collect satellite data; don’t rush the navigation process.
  • Give key waypoints names.  When marking a waypoint enter names like “camp” and “truck.”  It’s easier and more meaningful to find “truck” in the list of waypoints than is waypoint 542; or was it 245.  

·        After marking a waypoint, verify that it has been saved to the receiver's memory by checking either the map page or in the waypoint file (select “where to” or “find.”)  If the waypoint is on the map or in the list of waypoints, the hiker is ready to go.  If the waypoint is not found, start over.

·      
Outdoor Quest Image
 When it’s time to return to a destination chose “Where To” or “Find” on your keypad or menu.  Select the waypoint from the list provided.  Press the “Page” button and rotate through the many displays to the “Compass” page.  A large red arrow should appear on the face of the compass pointing to the selected waypoint.  When on course to the destination the arrow points to the top center of the receiver.  Practice this specific process at home before heading to the field.

  • Navigation is a perishable skill.  I recommend that two weeks before an outing take the GPS receiver everywhere.  Add waypoints, delete waypoints and find a saved waypoint.  This process develops familiarization with the unit and allows the user to develop confidence with the receiver      and personal ability.


  • Compliment GPS skills with a good review of map and compass fundamentals. Learn to back up electronic position fixing with bearing triangulation.   Worst case, a broken GPS becomes a paperweight for your map while afield.  For more information visit www.outdoorquest.blogspot.com .

·         When on the trail compare GPS position data with a map.  Compare what is presented electronically with what is on the map.

I suggest checking out Lawrence Letham’s book GPS Made Easy from the library.  This book compliments the owner’s manual.  An excellent reference for map and compass use is June Fleming’s Staying Found.

Taking a class can further enhance you GPS knowledge.  Classes are frequently offered through the local community college’s continuing education program or at local retailers such as  REI.

A map and compass always goes with me into the field.  I carry a Silva Ranger compass and get my maps from Caltopo.com  (their maps are free.)

Have fun while building on your fundamental navigation skill sets.  Consider setting up a treasure hunt or a geocach for a family get together.  Make it fun, make it simple and explain that these skills could one day make a huge difference if the ever got lost in the woods. 





Sunday, September 2, 2018

Snakes


 The California Department of Fish and Wildlife (CDFW) is reminding the public to be rattlesnake safe. All of California is snake country. Much like bats, rattlesnakes are often misunderstood. They play an important role in the ecosystem by keeping rodent populations under control.

California has six venomous snakes, all of which are various species of rattlesnake. They are heavy-bodied, blunt-tailed with triangular-shaped heads. A rattle may not always be present, as they are often lost through breakage and not developed on the young. Additional species information can be found here.


Rattlesnakes are generally not aggressive and usually strike when threatened or provoked. Given room, they will retreat and want to be left alone. They are not confined to rural areas and have been found in urban environments, lakeside parks and golf courses.
The best protection against unwelcome rattlesnakes in the yard is to have a “rattlesnake-proof” fence. The fence should either be solid or with mesh no larger than one-quarter inch. It should be at least 3 feet high with the bottom buried a few inches in the ground.
Keep the fence clear of vegetation and debris. Encourage and protect kingsnakes, which prey on rattlesnakes, and other natural competitors like gopher snakes and racers.

On rare occasions, rattlesnakes can cause serious injury to humans. Most bites occur between the months of April and October when humans are most active outdoors. The California Poison Control Center notes that rattlesnakes account for more than 800 bites each year in the U.S. with one to two deaths. 
CDFW recommends the following outdoor safety precautions:
  • Wear hiking boots and loose-fitting long pants.
  • Never go barefoot or wear sandals when walking through wild areas.
  • When hiking, stick to well-used trails.
  • Avoid tall grass, weeds and heavy underbrush where snakes may hide during the day.
  • Do not step or put your hands where you cannot see, and avoid wandering around in the dark.
  • Step ON logs and rocks, never over them, and be especially careful when climbing rocks or gathering firewood.
  • Remember, rattlesnakes can swim so never grab “sticks” or “branches” while swimming in lakes and rivers.
  • Teach children to respect snakes and to leave them alone.

What to do in the event of a snake bite:
  • Stay calm and wash the bite area gently with soap and water.
  • Remove watches, rings, etc, which may constrict swelling.
  • Immobilize the affected area and go to the nearest medical facility.
What you should NOT do after a rattlesnake bite:

  • DON’T apply a tourniquet.
  • DON’T pack the bite area in ice.
  • DON’T cut the wound with a knife or razor.
  • DON’T use your mouth to suck out the venom.
  • DON’T let the victim drink alcohol. 
A great article on snake bites was published in Outside Magazine.