Map, Compass & GPS

Map, Compass & GPS
Wild flowers along Fall Creek on the way to the Green Lakes - Oregon

Monday, November 9, 2015

Magnetic Compass Common Mistakes

The compass maker Brunton has listed the top 5 magnetic compass common mistakes when using a compass.
  1. Having the map 180 degrees incorrect when taking a bearing ie getting north and south mixed up.
  2. Using a compass near metal objects, or near electronic items, causing the magnetic needle to be inaccurate.
  3. Looking at the map all of the time and not looking at visual clues in the real world.
  4. Losing concentration and walking too far when you get to your point, falling victim to confirmation bias – the tendency to see things that confirm you are right, but miss things that show you are wrong.
  5. Only carrying one compass with you. If one breaks you are stuck.
Make sure you don't make one of the magnetic compass common mistakes.

Sunday, November 8, 2015

Contour Lines of a Topographic Map


Contours are the thin brown lines that snake across a topographic (topo) map.  Contour lines connect equal points of elevation such that every point on a specific line will be at that elevation above sea level. 


 



Contour lines are distinct and separate from lines for roads, coordinate systems (e.g., latitude and longitude) and trails.  Man made features like roads and buildings are black.  Contour lines are brown.  By adding elevation data to the map contour lines provide a three dimensional view of the terrain.  These lines provide shape and a sense of texture. 




The graphic above uses shading and electronic editing in an attempt to gain a three dimensional view of the terrain.  Compare the two maps.

Here are a few “keys to the kingdom” of reading these the brown contour lines.

There are two primary types of contour lines, index and intermediate lines. 

The dark brown, wider lines (below) are “index lines.”  The numbers adjacent correspond to altitude along the line.




For example, if the hiker locates his position on the topo and its right on top of the dark brown line with 5200 printed on the line, the altitude at that point is 5200 feet.  Consider the altitude to be the height above sea level.

The faint brown lines between the index lines are “intermediate contour” lines (see graphic above.)  Critical to intermediate lines is the specific elevation change between the lines.  This is known as the “contour interval.” The contour interval could be 10 feet, 20 feet or 200 feet; it just depends on the scale of the map and terrain.  To find the contour interval on a topo go to the bottom of the map or to the map key/index.  On a United States Geologic Survey (USGS) 7.5 minute topo map it will be at the bottom center of the map.  In the graphic below, the contour interval is circled in red.




In the small map above, look at Browns Mountain.  The spacing between the intermediate contour lines represents an elevation change of 20 feet.  Notice that the index lines are spaced five contour intervals apart or 100 feet between index lines.

Contour lines (index and intermediate) can provide a view of slope and pitch, depressions, ridge lines and level ground; the highs and lows of the earth’s surface.
The contour lines at Browns Mountain are close together and represent a steep increase in elevation.  Lines close together can indicate a peak, hill, ridge line or a cliff.

The contours of the land area to the left or west of Browns Mountain are spaced farther apart.  Such lines indicate flat ground like a meadow or plain.  Lines far apart make for gentle slopes and flat ground.

Ridges, valleys, and streams are represented by contour lines too.  A line’s shape identifies these land features.  For example, a valley’s shape is formed by a collection of “v’s.”  Tips of the v's point toward higher elevations.  Look at Alder Creek on the map below.  Note that the creek bed is in the bottom of a valley and water flow is from higher elevation to lower.


The contour lines that shape Alder Creek have v’s that point to higher altitude.  Look closely at the index lines and try to determine the elevation change as the creek flows north.

Contours shaped like a v or u, pointing toward lower elevation denotes ridges.  Notice the shape of the contour lines to the right and east of Alder Creek.  The v’s tips point toward lower elevation.  In fact, the v’s have become more like expanded “u’s.”



For more information about contour lines visit www.landnavigation.org or search the internet for the “World of Teaching – Topographic maps” (a very fine power point presentation.)






Monday, October 19, 2015

Celestial Navigation


I learned celestial navigation back in the 1970's. My son is a serving naval officer and told me several years ago that the US Navy no longer used or practiced celestial navigation.

That policy is in for a change.

The following article is from Defenseone.com and is written by Steve Mollman.

"Satellites and GPS are vulnerable to cyber attack. The tools of yesteryear are not.

Sometimes old school is best. In today’s U.S. Navy, navigating a warship by the stars instead of GPS is making a comeback.

The Naval Academy stopped teaching celestial navigation in the late 1990s, deeming the hard-to-learn skill irrelevant in an era when satellites can relay a ship’s location with remarkable ease and precision.

But satellites and GPS are vulnerable to cyber attack. The tools of yesteryear—sextants, nautical almanacs, volumes of tables—are not. With that in mind, the academy is reinstating celestial navigation into its curriculum. Wooden boxes with decades-old instruments will be dusted off and opened, and students will once again learn to chart a course by measuring the angles of stars."


Read Mr. Mollman's complete post.

Wednesday, October 14, 2015

Important Considerations When Working with Maps


When working with maps there are some key points to remember, especially when using a map in conjunction with a compass and a Global Positioning System (GPS) receiver.

Datum

Maps made based on a datum (horizontal and vertical).  Datum is the origin from which all points on a map are measured. Three primary datum have been used to develop maps in the United States.  These are:

  • North American Datum of 1927 (NAD27)

  • North American Datum of 1983 (NAD83)

  • World Geodetic System of 1984 (WGS84).

Datum is a mathematical model that accounts for developing a map from a spheroid (the earth) to a flat map.

When using a GPS receiver the datum must be set to match the horizontal datum on the map. If the datum does not match, there will be errors when plotting data on a map.

Map datum information is found in the title block at the bottom left corner in the margin of a USGS map.  Other maps (e.g., US Forest Maps and commercial maps) seemingly provide datum in rather random locations. The hiker will have to scan the map to find this information.

Geographic North

Maps are laid out in relation to geographic North (also referred to as the north pole or true north.) This is important to remember because the traditional magnetic compass provides information based on magnetic north.  Magnetic north changes over time, while geographic north does not change. The difference is referred to as magnetic declination. When using a compass and map together the hiker must account for this difference.   Because of this I recommend that the navigator have an adjustable compass such as the Sylva Ranger.

For more on declination go here.

Maps Are Not Perfect

For a map to be considered reliable and accurate, map symbols marked on a map must be in proper relation to known landmarks or positions located on the ground.  In 1947, the “United States National Map Accuracy Standards” were established as the standards of accuracy for published maps and are currently in effect. The standards require a stringent percent of accuracy within centimeters of both location and elevation of points tested. However, even with these standards, maps are not absolutely accurate because:

  • Maps represent a curved and uneven surface that is drawn on a flat piece of paper, which results in a distorted picture.

  • There is a margin of error (human error and inadequate survey procedures) in surveys that were used to create maps. Also, there are factual matters (errors such as names, symbols of features, and the classifications of roads or woodlands); sometimes the information is wrong and names and features change.

  • If a map has been photocopied, it most likely is not to scale.

  • Maps editions are dated and not current.

Maps do not accurately represent the ground surface

Topographic maps provide an overview of the ground surface.   A USGS 7.5 minute map uses  a scale of 1:24,000.  This means that 1” of map distance equals 2000’ feet on the ground.  1square inch on the map is equal to 91 acres on the ground.
The symbolic information provided by colors provides only a general description on the ground.  For example, green coloration refers to vegetation such as forested areas.  But what color does not tell you what is the surface really like?  The map doesn’t tell the hiker if the area is full of brush, blown down trees or large area of loose rock.

Resolution

Though maps are not perfect there are things the hiker can do to lessen the issue with maps.  Here are some suggestions:

  • Review trail guides of area to be visited.

  • Visit with other hikers that have been to the same area earlier.

  • Visit  with government agency officials  such as:

    • Forest Service Backcountry Rangers
    • Fish and Game law enforcement officials.
    • Biologists
    • Search and Rescue organizations  in the county to be visited
    • National Park Rangers


The reference for this post is Basic Land Navigation produced by the National Wildfire Coordinating Group (NWCG.)  This is a straight forward document that covers the essential elements of land navigation: it is a good introduction and the source for this post. This is a free publication.  Down load it here:  http://www.nwcg.gov/sites/default/files/products/pms475.pdf. 



Saturday, October 10, 2015

Stay On The Trail

Sectionhiker.com has a solid post about not going off trail and the damage off trail travel can do.

" Have you ever seen someone trampling rare lichens above tree  line by hiking outside designated trails? Camping illegally on an open summit? Cutting down krumholz to fuel a fire? Carving their initials into a shelter? Building a new fire ring? Washing their dishes with soap in a wilderness pond? Knocking over rock cairns? Breaking live tree branches near a campsite for a fire? Digging a trench around their tent to drain rain? Leaving toilet paper on top of the ground? "



Sectionhiker.com has lots of good discussion topics with this post.

Friday, October 9, 2015

Stove Efficiency

Hiking Jim at Adventures in Stoving has a fine post to evaluate if a stove is operating efficiently.  He also has some suggestions to setup a stove for peak performance.





Thursday, October 8, 2015

Understanding Magnetic Declination

“Declination: A Noun. The horizontal angle between the true geographic North Pole and the magnetic North Pole, as figured from a specific point on the Earth.”


 Declination is a term that causes “brain cramps” for many of my students in my map and compass classes. When I mention Magnetic Declination eyes roll.


The web site www.magnetic-declination.com has an excellent discussion of what declination is and what causes it:


“Magnetic declination varies both from place to place, and with the passage of time. As a traveler cruises the east coast of the United States, for example, the declination varies from 20 degrees west (in Maine) to zero (in Florida), to 10 degrees east (in Texas), ......the magnetic declination in a given area will change slowly over time, possibly as much as 2-25 degrees every hundred years or so.......... Complex fluid motion in the outer core of the Earth (the molten metallic region that lies from 2800 to 5000 km below the Earth's surface) causes the magnetic field to change slowly with time."

Land navigation is based on the relationship to the North Pole; also known as “true north.  The measure of degrees of direction in relation to true north is called “degrees true.”  Maps are laid out in degrees true.  Land features (buttes, mountains, streams) on a topographic map are in reference to degrees true.  By that I mean the bearing from one mountain peak to another will be referenced in degrees true.  The map below illustrates that point. 







Magnetic compasses do not point to true north (the North Pole); the magnetic needle points to an area that could be considered the magnetic North Pole. 
As illustrated below, declination data can be found in the diagram at the bottom of a USGS topographic map, (on some commercially produced maps it can be hard to find.) 

Because declination changes over time, I recommend that map declination information be verified at www.magnetic-declination.com.   This is essential in the Pacific Northwest where maps are notoriously out of date in terms of road,  and city data.
So, how do we make this simple?  How do we convert magnetic to degrees true?
I could do the math.  In Oregon, where I live, the magnetic declination is 15.6° East declination.

My recommendation: have the compass do the work so that there is no confusion with the math.

To do this, I need to choose a compass that can be adjusted for declination.  Some examples are the Silva Ranger or the Suunto M3.

With one of these compasses, the compass dial or housing is adjusted and rotated manually.  Both the Suunto and Silva Ranger come with a small, flat adjusting tool.  Consult with owner’s manual that came with the compass.

If declination is Easterly (Western U.S.) I will rotate the dial causing the baseplate’s orienting arrow to move in a clockwise direction.

   If declination is Westerly (Eastern U.S.) I will rotate the dial causing the baseplate’s orienting arrow to move in a counter-clockwise direction.

Now, adjust the dial and align the red magnetic needle on top of the orienting arrow (the red arrow engraved on the baseplate) the compass will provide directions in degrees true.