Map, Compass & GPS

Map, Compass & GPS
Wild flowers along Fall Creek on the way to the Green Lakes - Oregon

Tuesday, December 29, 2015

What Is An Azimuth?


An azimuth is the angular direction to an object.  Azimuths are described commonly in degree increments from either true, magnetic or grid north.

In the world of recreational navigation, GPS receiver operations and orienteering the use of the term “bearing” has become synonymous with azimuth.

Azimuth direction is measured from north clockwise in 360° increments. The point from which the azimuth originates is from the center of an imaginary circle.  This imaginary point is the operator.


Azimuth can be measured with a magnetic compass, a map and by rough estimation using the sun and North Star.



Azimuths can be expressed in degrees true and degrees magnetic.  Degrees true uses the north pole as the principle reference while degrees magnetic refers to reference from the magnetic pole.

Outdoor Quest Image
For more information on bearings and azimuth read Making Sense of The Declination Diagram.

Thursday, December 17, 2015

Addressing Hearing Loss

Addressing Hearing Loss

Some families play board games; some take an annual trip to the beach. Our family traditions were a
little bit different. I completed my first summit of the 14,411-foot Mount Rainier when I was 12 years old – something normal by my family’s standards. Some of you may know my uncle, Jim Whittaker, the first American to summit Mount Everest. Or my dad, Lou Whittaker, the founder of Rainier Mountaineering.

Along with a love of climbing, I inherited from my family a deep passion for life and adventure. As my father was famed to have said, “When it comes to dying, I want to know what it is like to have really lived.” I have translated that spirit into everything I do in life – from mountaineering, to making music, to filmmaking.

About ten years ago, though, my wife Sarah started to notice that my love of adrenaline may not have been the only thing I’d inherited from my dad – it seemed my hearing, like his, was starting to go.

At the time, I didn’t really notice any of the effects of my declining hearing, so I pretty much waved it off. And, then, it become noticeable. Within a few years, it was more often than not that I had to ask a client in climbing school to repeat a question. It was becoming a bit more difficult to find the exact right sound when I was recording with my band.

Between my dad’s hearing loss and my lifelong love of loud music and power tools – it wasn’t a huge shock I had found myself at this point. But I can’t lie – I was not thrilled at the thought of having to get a hearing aid. My reluctance was not because of any stigma attached to hearing aids, but more so because of the hassle of setting them up. I knew you have to go into the audiologist repeatedly to get them working just right. Even then, with all of the various environments I am in, I knew there was no way that one setting would work across the board. To add to my hesitation, in addressing my dad’s hearing loss, it didn’t seem like his hearing aids had helped him at all. Particularly in crowded environments, his hearing aids just amplified sound, making the environment overwhelming.

I didn’t want that, especially since I was still regularly climbing and guiding climbs up the mountain. If a hearing aid just picked up and amplified the sound of the wind, it wouldn’t do much good for me in that setting – one of the environments where my hearing was the most important to me. So, for that reason, I kept putting off addressing my hearing loss.

That was, until last year, when I was introduced to the ReSound LiNX. I had mentioned the idea to my audiologist before but it wasn’t yet in existence – the idea of being able to easily adjust the audio settings of a hearing aid on my own. The LiNX was the first ever Made for iPhone hearing aid, which meant it communicated directly with your phone and could be adjusted wirelessly through an app.

As an audio engineering geek, I was hooked right away. Through the ReSound Smart app, I could use my iPhone to adjust my hearing aids’ volume, bass and treble, and direction of sound amplification. Calls and music were streamed directly through my phone to the aids. The first day I was fitted with the ReSound LiNX, I remember hearing the sounds of rain squelch under my shoes, and my shoes subsequently squeaking on the tile when I got home – sounds I hadn’t even realized I was missing out on.


Now – wearing ReSound’s latest, the LiNX2 – I can hear a pebble falling on the mountain. My clients tell me my hearing is bionic. Sometimes I think about my decision to address my hearing loss. Like any other challenge in life, I took it head on, now sporting a bright red hearing aid behind my ears. And, as someone who isn’t ready to slow down at all, I sure am happy that I did.

Sunday, November 29, 2015

Terrain Association


“A good view will help to form a picture of the shape, the patterns and grain of the land itself.  High ground will tell a story of the geological formations and erosion.”
                                    The Natural Navigator by Tristan Gooley

Terrain association is a key step in land navigation.  While the topographic (topo) map identifies terrain features through the use of contour lines, colors and symbols, terrain association is a process of confirmation of map to land features.


In the field a key step in terrain association is to orient the topo.  Orienting a map is a starting point to identify where I am, where I want to go and where I have been.  When oriented, map north will match geographic north on the ground. For information on how to orient a map read my supporting post.

 I orient my topographic map (topo) before I leave the trail head and at regular intervals during a hike.
It is a process where I involve both map and compass.  Of course, orienting a map can be done without a compass and done visually.  I find using a compass takes just a tad more time and the more hands on time with the compass the better. 

A key component of terrain association will be the evaluation of the information provided by the contour lines.  Contour lines identify five key terrain features that include hilltops, valleys, ridges, depressions and saddles.
“Match the terrain to the map by examining terrain features.”
                                    US Army Field Manual FM 21-26 Map Reading and Land Navigation
Gain a clear view of the land in the immediate area before comparing map to ground features.  If needed get an elevated view of the surroundings.
While looking at the map, I break down the terrain and lay of the land into two components that I refer to as pathways and boundaries. 
Pathways make up my route through the backcountry.  Pathways are trails, old “jeep roads,” government roads (e.g., Forest Service and Bureau of Land Management gravel and unimproved roads.)  Not all trails and roads are pathways.  In an area lacking trails and roads, an open area clear of significant vegetation may be a pathway.  Similarly, a valley or ridge line might be a pathway too.  Importantly, the pathway will be in the direction of desired travel.  Finally, the hiker needs to ensure the pathway is safe and he is physically up to the task. 
Trail guide books are an excellent source for finding a pathway.  Many of the newer publications offer coordinates for the GPS receiver, map views and a description of the recommended route.

Boundaries are major land features that help guide the hiker along his path too.  They are features that provide containment and may prevent the hiker from going far off track.  Boundaries can be rivers, streams, rail road beds, roads and large features such as a mountain range or ridge line.  Boundaries keep the hiker within the route of travel.  For example, if a stream is crossed then perhaps the boundary has been violated.  

Figure 1 In the image above the blue line is the pathway with the borders and boundaries in red.

In the image above the blue line mirrors an existing trail and is a pathway.  The two red lines border steep terrain and are the boundaries for this hike.

Start the terrain association process at home.  By reviewing the route on the kitchen table one begins to develop a mental map.  Maps reviewed with trail guides and conversations with those knowledgeable of the area improve the hiker’s familiarization of the backcountry pathway; this is the detail that improves and supports navigation.  The refined mental map aids in the correlation process while in the field.

Practice and frequent review makes the task of terrain association simpler over time.  Involve children in the process too.  They will be your future navigators.


                                                                                                    

Wednesday, November 25, 2015

Guests

My guests are arriving early for Thanks giving dinner.

Tuesday, November 24, 2015

Suunto Compass Review

A good friend alerted me to Sectionhikers' post about the Suunto M-3D compass.


"The Suunto M-3 D Compass is a baseplate style adventure compass with a declination adjustment that is optimized for use in forested or mountainous terrain where you can rarely see your destination. I’ve been using mine for 4 years, ever since I became really interested in off-trail hiking and navigation and started teaching those skills as a instructor for the Appalachian Mountain Club."


To read the complete post go here.


The Suunto M-3D is a super compass.  Think of it as a rugged scientific instrument.


This is a great choice for a Christmas present.

Wednesday, November 18, 2015

GPS Battery Power

In 13 years of teaching GPS classes I have had very, very few reports of a GPS receiver breaking or failing electronically. What I do hear about is battery power draining at the worst time.
I’d offer a few suggestions:


  • Batteries will generally last for a reported 20 hours of continuous use; more on that shortly.  If you just turn it on, mark a waypoint, and turn the receiver off, the batteries will last quite a while.
  • I prefer the Duracell and COSTCO alkaline batteries.  I have found that cheap batteries don’t last as long and require replacement more frequently.
  • If a GPS receiver can use Lithium batteries then consider that option and do check the owner’s manual.  Lithium batteries are more expensive but last longer and work better in cold temperatures (down to -40°F).
  • Carry a spare set of AA batteries.
  • I keep fresh batteries in my GPS all the time.  That said, because of my SAR responsibilities and the frequency of my trips, fresh batteries are always loaded.  It’s my personal preference that “works for me.”
  • If you have an older receiver such as the Garmin 12, keep batteries in it always.  The four AA batteries keep the internal lithium battery charged.  The internal lithium provides power to retain saved waypoints and tracks.
  • Features such as the backlight, audible tones and electronic compasses drain a set of batteries.  On many models the electronic compass can be turned off by pressing and holding down the page button.  Manage your power needs.
I don’t have a baseline for rechargeable batteries.  My suggestion would be to keep extra’s on hand and really “wring them out” over a full day to see how well they work.  Do this before your trip afield; remember, it has to work for you.

I keep my GPS powered up all day when in the backcountry.  I download my track and waypoint data at the end of a hike to my Terrain Navigator software. This gives me the best historical record of my outing.  Usually batteries become drained after a full day and it just easier  to change them out as I get my gear ready for the next day.  


A fully charged GPS is a wonderful tool that complements your backcountry experience. Remember, even though you have the latest and best receiver, always take that map and compass on every trip.

Monday, November 16, 2015

Dangerous Weather in the Backcountry


In the field forecasting is an important skill for the backcountry hiker.  Learning the basics is an important first step.

Let me begin by stating that forecasting begins at home.  Monitor the local news and the cable weather channels to get a broad, general idea of the weather conditions before hitting the trail.  Further refine that information by checking inter net sources such as www.wunderground.com and the National Weather Service’s site www.noaa.gov.
My “go to” reference is Northwest Mountain Weather by Jeff Renner (published by the Mountaineers.)   Renner is a professional meteorologist and broadcaster, an outdoorsman
and flight instructor.  Northwest Mountain Weather provides a superb overview on how “the weather works” in the Pacific Northwest.  Uniquely focused to this region, this book provides an overview on climate and weather, local weather patterns, snow and avalanche conditions, and provides many charts and data sources.  My favorite part of the book is Chapter Seven’s “Field Forecasting Guidelines.” This chapter identifies what to watch for and monitor while in the backcountry.  

The balance of this post will focus on what to consider about hiking during periods of thunderstorm activity.

The dark clouds of a thunderstorm provide a strong sense of mass and energy.  They can be seen a long way off.  Avoid them when possible.

As a storm develops you will notice that the clouds may change shape, grow taller and darker.In many cases an anvil shaped cloud growing tall and developing a distinct leading edge maybe observed.  This is a sign that a storm is on the way.

Lightning is the predominant killer associated with a thunderstorm.  Roughly 40 people are killed each year and approximately 240 are injured.  Visit the National Weather Service’s site for more information about lightning safety; http://www.lightningsafety.noaa.gov/medical.htm

The ideal action to avoid the danger of a significant storm is to get out of the weather.  Leave the field for the safety of a building or a car.  Caves can provide shelter but must be deep and dry.  A shallow cave offers almost no protection.
Renner’s guide lines and actions include:

            “Do watch for cumulus showing strong upward development.
            Do choose a campsite uphill from valley floor.
            Do get away from exposed areas, pinnacles, peaks.
            Do get away from water.
            Do seek low ground in open valleys and meadows.
            Do move at once if hair or scalp feels tingly.
            Do not stand under trees.”[1]

Wilderness Survival trainer Peter Kummerfeldt amplifies Renner’s comment by adding the following:

            “Be proactive – don’t wait until you are getting wet to suspend outdoor activities.
Don’t be connected to the tallest object in the area.  If caught outside, move into low trees of even height and stand away from tree trunks.  Stay away from isolated trees.
Water is a great conductor of electricity – get out of the water at the first sign of a storm developing.”[2]  (For more information visit Kummerfeldt’s web site, www.outdoorsafe.com.)

Thunderstorms have the potential to deliver large quantities of water.  Look for higher ground and stay out of stream beds that may flood significantly and without warning.
I monitor my GPS receiver’s barometer.  I change my elevation plot to a pressure plot and leave the receiver on.  Even though a GPS receiver may not be the most accurate it is the plot’s trend over time that I am concerned about.  Should I see the pressure drop noticeably I’ll take shelter or return to my vehicle.

The key is to stay alert and make a plan of action when a storm approaches. 
I previously posted a short article about using your GPS to monitor barometric pressure while in the backcountry; go here to read the post.  I thought it might be worthwhile to cover a few other topics about in the field observations.  This post is about thunderstorms.




[1] Jeff Renner, Northwest Mountain Weather, (The Mountaineers, 1992), p 100
[2] Peter Kummerfeldt, Surviving a Wilderness Emergency, (OutdoorSafe Press, 2006), p56-57